CARBON STEEL

Availability: In stock

Carbon steel pipe can be structural in nature or used in fluid, gas, oil transmission. We carry carbon steel piping in A500, A53, A106 and A252.The grade indicates the testing methods required for a given application. It is critical that structural grades of carbon steel pipe not be used for pressure or fluid applications.

1.  ASTM A500 CARBON STEEL PIPE

SIZES

Pipe Size

OD (inches)

Schedule 10

Standard

Schedule 40

XH

Schedule 80

¾” 1.05 X X X    
1” 1.315 X X X    
1 ¼” 1.66 X X X X X
1 ½” 1.9 X X X X X
2” 2.375 X X X X X
2 ½” 2.875 X X X X X
3” 3.5 X X X X X
3 ½” 4 X X X X X
4” 4.5 X X X X X
5” 5.563   X X X X
6” 6.625   X X X X
8” 8.625   X X X X
10” 10.75  

X

X

X

 
12” 12.75   X X X  
14” 14 X X   X  
16” 16 X X   X  
18” 18 X X   X  
20” 20 Available in schedules 10, 20, 30, 40, 80

 

TYPICAL CHEMICAL PROPERTIES

Grade B

Grade C

Carbon, Max %

0.260

0.230

Manganese, Max %

—-

1.350

Phosphorus, Max %

0.035

0.035

Sulphur, Max %

0.035

0.035

Copper, when copper steel is specified, Min %

0.200

0.200

 

2. A53 CARBON STEEL PIPE

 

SIZES

½” – 12” some limitations dependent upon grade. Sizes up to 26” OD are available on limited basis.

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless. This specification covers seamless and welded black and hot-dipped galvanized steel pipe.

 

3. ASTM A53 PIPE TYPES

The following types and grades of A53 pipe are covered within this specification:

 

Type F – Furnace-butt-welded, continuous welded Grade A

Type E- Electric-resistance-welded, Grades A and B

Type S- Seamless, Grades A and B

 

4. ASTM A106 PIPE

 

CHARACTERISTICS

A106 pipe is always produced by the seamless method and can be bent, coiled and flanged. In sizes less than 2″ is it usually produced as a cold drawn product. 2″ and up are usually hot finished.

APPLICATIONS

This pipe is always produced by the seamless method and is intended for use in high temperature applications.

SIZES

1” – 26” dependent on OD vs Wall Ratio

 

TYPICAL MECHANICAL PROPERTIES

Grade B

Grade C

Tensile Strength, Min psi

60,000

70,000

Yield Strength, Min psi

30,000

40,000

 

5.   A252 PIPE

 

CHARACTERISTICS

A252 pipe is a welded and seamless pipe for piling.

 

APPLICATIONS

The steel cylinder acts as a permanent load carrying member or as a shell to form cast–in–place concrete piles.

 

SIZES

10.  6” – 20”

TYPICAL MECHANICAL PROPERTIES

Grade 1

Grade 2

Grade 3

Tensile Strength, Min psi

50,000

60,000

66,000

Yield Strength, Min psi

30,000

35,000

45,000

 

1 review for CARBON STEEL

There are no reviews yet.

Be the first to review “CARBON STEEL”